Overview



This application consists of two subsystems:

  • Voice Mail Recording Subsystem
  • Listen to Voice Mail Subsystem


Both of them look like independent applications and require independent call routing setup.

Voice Mail Recording Subsystem

Note. This application is executed automatically with no additional setup when On-Net Voicemail Connection is enabled.

This application is executed when the callee is unavailable. The application plays prompt and records a caller's voice message into the voice mailbox. These messages can be later inspected by the owner of mailbox using the Listen To Voice Mail Subsystem.

Call routing setup

  1. Add vendor connection. Set the Asterisk's host/port in the Destination field of Vendor Connection (ex:192.168.0.100:5062).
  2. Set the CLD Translation Rule for the connection to the value s/^/vm-/
  3. Add route to this connection in the same way as for normal calls but with lower preference than for normal calls. This will forward the call to the Voice Mail after the normal call to destination has failed. (Smaller value in the field Preference of the Vendor Connection Route means lower preference.)